I looked up one of my old 3d projects from an independent study from 2003 and decided to touch it up. This was a prototype for a standalone DVD copier/media player, where an original and blank would be inserted in the trays and it would create a duplicate. A product similar to this was released about a year later, and now it’s all pretty laughably obsolete.
After reading about the Vertical Farm Project, I became interested in trying to design a building with some type of environmental benefit for my final ARTD490 project. I came up with a scalable tunnel/road-covering for rural roads, powered by solar cells, and intended to provide several benefits:
The arch design is essentially in compliance with AASHTO Standards for US interstate bridges and passageways, with a clearance over 18 feet and an inside width of 40 feet. Each section is 10 feet long.
Variations on the design include a longer version with lined troughs on each side so topsoil can be packed into the outer supports, increasing its insulation properties and reducing its visibility in naturally pristine areas. Another variation envisions each section connected to another by mag-lev rails, allowing solar energy to be expended deploying a flexible, weatherproof “curtain” between arches in the case of severe storms or emergencies.
With the exception of the solar cells, construction materials are low cost but durable enough for prolonged service. More concept renders below:
Front/Side Perspective View
Additional “Night” View
Draft of Daylight Composite
